Determination of hexavalent chromium in traditional Chinese medicines by high‐performance liquid chromatography with inductively coupled plasma mass spectrometry

An analytical method that combined high‐performance liquid chromatography with inductively coupled plasma mass spectrometry has been developed for the determination of hexavalent chromium in traditional Chinese medicines. Hexavalent chromium was extracted using the alkaline solution. The parameters such as the concentration of alkaline and the extraction temperature have been optimized to minimize the interconversion between trivalent chromium and hexavalent chromium. The extracted hexavalent chromium was separated on a weak anion exchange column in isocratic mode, followed by inductively coupled plasma mass spectrometry determination. To obtain a better chromatographic resolution and sensitivity, 75 mM NH₄NO₃ at pH 7 was selected as the mobile phase. The linearity of the proposed method was investigated in the range of 0.2–5.0 μg L^?1 (r² = 0.9999) for hexavalent chromium. The limits of detection and quantitation are 0.1 and 0.3 μg L^?1, respectively. The developed method was successfully applied to the determination of hexavalent chromium in Chloriti lapis and Lumbricus with satisfactory recoveries of 95.8–112.8%.     

Direct Patterning and Biofunctionalization of a Large‐Area Pristine Graphene Sheet

Direct patterning of streptavidin and NIH 3T3 fibroblast cells was successfully achieved over a large‐area pristine graphene sheet on Si/SiO₂ by aryl azide‐based photografting with the conventional UV lithographic technique and surface‐initiated, atom transfer radical polymerization of oligo(ethylene glycol) methacrylate.     

Oxide-supported Ir nanodendrites with high activity and durability for the oxygen evolution reaction in acid PEM water electrolyzers

Reducing the noble-metal catalyst content of acid Polymer Electrolyte Membrane (PEM) water electrolyzers without compromising catalytic activity and stability is a goal of fundamental scientific interest and substantial technical importance for cost-effective hydrogen-based energy storage. This study presents nanostructured iridium nanodendrites (Ir-ND) supported on antimony doped tin oxide (ATO) as efficient and stable water splitting catalysts for PEM electrolyzers. The active Ir-ND structures exhibited superior structural and morphological properties, such as particle size and surface area compared to commercial state-of-art Ir catalysts. Supported on tailored corrosion-stable conductive oxides, the Ir-ND catalysts exhibited a more than 2-fold larger kinetic water splitting activity compared with supported Ir nanoparticles, and a more than 8-fold larger catalytic activity than commercial Ir blacks. In single-cell PEM electrolyzer tests, the Ir-ND/ATO outperformed commercial Ir catalysts more than 2-fold at technological current densities of 1.5 A cm^–2 at a mere 1.80 V cell voltage, while showing excellent durability under constant current conditions. We conclude that Ir-ND/ATO catalysts have the potential to substantially reduce the required noble metal loading, while maintaining their catalytic performance, both in idealized three-electrode set ups and in the real electrolyzer device environments.     

Operando X-ray absorption and EPR evidence for a single electron redox process in copper catalysis

An unprecedented single electron redox process in copper catalysis is confirmed using operando X-ray absorption and EPR spectroscopies. The oxidation state of the copper species in the interaction between Cu(ii) and a sulfinic acid at room temperature, and the accurate characterization of the formed Cu(i) are clearly shown using operando X-ray absorption and EPR evidence. Further investigation of anion effects on Cu(ii) discloses that bromine ions can dramatically increase the rate of the redox process. Moreover, it is proven that the sulfinic acids are converted into sulfonyl radicals, which can be trapped by 2-arylacrylic acids and various valuable β-keto sulfones are synthesized with good to excellent yields under mild conditions.     

Is a polymer semiconductor having a “perfect” regular structure desirable for organic thin film transistors?

This study utilized high temperature NMR and matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) mass spectrometry to reveal that appreciable amounts of structural defects are present in the diketopyrrolopyrrole (DPP)–quaterthiophene copolymers (PDQT) synthesized by the Stille coupling polymerization with Pd(PPh₃)₂Cl₂, Pd₂(dba)₃/P(o-tol)₃, and Pd(PPh₃)₄ catalyst systems. It was proposed that these structural defects were produced via homocoupling side reactions of the C–Br bonds and the organostannane species. Model Stille coupling reactions further substantiated that the amount of structural defects are catalyst-dependent following the order of Pd(PPh₃)₂Cl₂ > Pd₂(dba)₃/P(o-tol)₃ > Pd(PPh₃)₄. To verify the structural assignments, “perfect” structurally regular PDQT polymers were prepared using Yamamoto coupling polymerization. When compared to the structurally regular polymers, the polymers containing defects exhibited notable redshifts in their absorption spectra. Surprisingly, the “perfect” structurally regular polymers showed poor molecular ordering in thin films and very low charge transport performance as channel semiconductors in organic thin film transistors (OTFTs). On the contrary, all the “defected” polymers exhibited much improved molecular ordering and significantly higher charge carrier mobility.     

Admissibility of linear estimators with respect to inequality constraints under some loss functions

In this paper, we study the issue of admissibility of linear estimated functions of parameters in the multivariate linear model with respect to inequality constraints under a matrix loss and a matrix balanced loss. Under the matrix loss, when the model is not constrained, the results in the class of non-homogeneous linear estimators [Xie, 1989, Chinese Sci. Bull., 1148–1149; Xie, 1993, J. Multivariate Anal., 1071–1074] showed that the admissibility under the matrix loss and the trace loss is equivalent. However, when the model is constrained by the inequality constraints, we find this equivalency is not tenable, our result shows that the admissibility of linear estimator does not depend on the constraints again under this matrix loss, but it is contrary under the trace loss [Wu, 2008, Linear Algebra Appl., 2040–2048], and it is also relative to the constraints under another matrix loss [He, 2009, Linear Algebra Appl., 241–250]. Under the matrix balanced loss, the necessary and sufficient conditions that the linear estimators are admissible in the class of homogeneous and non-homogeneous linear estimators are obtained, respectively. These results will support the theory of admissibility on the linear model with inequality constraints.     

Analysis of the mean squared derivative cost function

In this paper, we investigate the mean squared derivative cost functions that arise in various applications such as in motor control, biometrics and optimal transport theory. We provide qualitative properties, explicit analytical formulas and computational algorithms for the cost functions. We also perform numerical simulations to illustrate the analytical results. In addition, as a by‐product of our analysis, we obtain an explicit formula for the inverse of a Wronskian matrix that is of independent interest in linear algebra and differential equations theory. Copyright © 2017 John Wiley & Sons, Ltd.     

Molecular engineering tuning optoelectronic properties of thieno[3,2-<Emphasis Type="Italic">b</Emphasis>]thiophenes-based electrochromic polymers

Thieno[3,2-b]thiophene (TT) monomers end-capped with 3,4-ethylenedioxythiophene (EDOT) moieties are electropolymerized to form π-conjugated polymers with distinct electrochromic (EC) properties. Steric and electronic factors (electron donor and acceptor substituents) in the side groups of the TT core, as well as the structure of the polymer backbone strongly affect the electrochemical and optical properties of the polymers and their electrochromic characteristics. The studied polymers show low oxidation potentials, tunable from–0.78 to +0.30 V (vs. Fc/Fc⁺) and the band gaps from 1.46 to 1.92 eV and demonstrate wide variety of color palettes in polymer films in different states, finely tunable by structural variations in the polymer backbone and the side chains. EC materials of different colors in their doped/dedoped states have been developed (violet, deep blue, light blue, green, brown, purple-red, pinkish-red, orange-red, light gray, cyan and colorless transparent). High optical contrast (up to 79%), short response time (0.57–0.80 s), good cycling stability (up to 91% at 2000 cycles) and high coloration efficiency (up to 234.6 cm² C^–1) have been demonstrated and the influence of different factors on the above parameters of EC polymers have been discussed.